Technology Alerts

A Series of Alerts Provided by ASC Engineering

Tuesday, May 10, 2016

From the methanol to olefins: an operational assessment



CATEGORY: METHANOL TO OLEFINS 
From the methanol to olefins: an operational assessment
Type
Journal Article
Author
Aaqil Ali
Author
Vinita Manna
URL
http://www.inderscienceonline.com/doi/abs/10.1504/IJESMS.2016.075528
Volume
8
Issue
2
Pages
149-156
Publication
International Journal of Engineering Systems Modelling and Simulation
Date
January 1, 2016
Abstract
The plant-wide process is viewed as a set of such sub-systems where a combination of several control arrangements is evaluated. In this work, the design and control of an MTO described by a rigorous dynamic model using HYSYS is assessed using different well established control combination approaches. In the first, the steady state process design and the control system are setting-up using sequential single loops. Authors demonstrate that operability is a strong function of the process design and potential operability bottlenecks are identified. In the second approach, the process design and the control system are setup using cascade and split control arrangements simultaneously leading to a better controlled system than that obtained using the sequential approach.
Posted by Jean Steinhardt Consulting at 5:42 PM
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Labels: METHANOL-TO-OLEFINS, WEEKLY

No comments:

Post a Comment

Newer Post Older Post Home
Subscribe to: Post Comments (Atom)

Followers

Blog Archive

  • ►  2017 (58)
    • ►  January (58)
  • ▼  2016 (1702)
    • ►  December (161)
    • ►  November (100)
    • ►  October (119)
    • ►  September (199)
    • ►  August (120)
    • ►  July (141)
    • ►  June (140)
    • ▼  May (140)
      • Hydroprocessing Of Hydrocarbons Using Delaminated ...
      • Use of membrane technology for oil field and refin...
      • Oil refining spent catalysts: A review of possible...
      • Electrocatalyticaly-Assisted Oxidative Dehydrogena...
      • Ionic Liquids for Extraction Processes in Refinery...
      • A study on modelling, data reconciliation and opti...
      • Concentrations of vanadium and nickel and their ra...
      • Absorption–hydration hybrid method for ethylene re...
      • The products of heavy sulfur-rich oil conversion i...
      • Soft sensing of product quality in the debutanizer...
      • Multivariable control of a debutanizer column usin...
      • Dynamics and Control Simulation of a Debutanizer C...
      • Solvent recovery in solvent deasphalting process f...
      • Effect of Ionic Surfactants on Improving Deasphalt...
      • Investigation of corrosion and fouling in syngas c...
      • Erosion corrosion failure analysis of the elbow in...
      • Metallocenes and Catalyst Compositions Derived The...
      • Process For Preparing A Spent Catalyst For Preciou...
      • Techno-economic analysis of excess heat driven pos...
      • Novel Reactor For Ionic Liquid Catalyzed Alkylatio...
      • Aqueous Solutions Of Amine Functionalized Ionic Co...
      • High Efficiency Fuel Cell System With Anode Gas Ch...
      • Method And Detector For Detecting An Analyte (Nede...
      • Transient natural gas liquefaction and its applica...
      • The progressive routes for carbon capture and sequ...
      • Studies of Carbon Dioxide Capture on Porous Chitos...
      • Simulation and analysis of CO2 capture process wit...
      • Review of fundamental properties of CO2 hydrates a...
      • Post combustion carbon dioxide capture using amine...
      • New Reactive Extraction Based Reclaiming Technique...
      • Multi-objective optimisation of a Rectisol™ proces...
      • Improving CO2 adsorption capacities and CO2/N2 sep...
      • Holey graphene frameworks for highly selective pos...
      • Dynamic capture of low-concentration CO2 on amine ...
      • Control Relevant Model of Amine Scrubbing for CO2 ...
      • Carbon capture by physical adsorption: Materials, ...
      • Bimetallic nickel complexes for selective CO 2 car...
      • Attrition resistance of calcium oxide–copper oxide...
      • A cryogenic air separation process based on self-h...
      • Accurate prediction of properties of carbon dioxid...
      • Olefin Oligomerization Using Delaminated Zeolite S...
      • Alkylation Reaction Using Delaminated Zeolite Supp...
      • A Secure, Intelligent, and Smart-Sensing Approach ...
      • Purification and detoxification of petroleum refin...
      • Process For Producing Styrene (Shell)
      • The study of the composition of oils and structure...
      • A Continuous-time Formulation for Refinery Product...
      • Odours emission and control in the petroleum refin...
      • Implementing Artificial Neural Networks Modelling ...
      • Process control with compact NMR
      • Solving a fuzzy multi-objective products and time ...
      • Middle Distillate Hydrocracking Catalyst Containin...
      • A novel intrinsically microporous ladder polymer a...
      • Artificial Neural Networks Controller for Crude Oi...
      • Metallurgical Extraction Technique To Recover Plat...
      • A superior mixed electron and carbonate-ion conduc...
      • A blending rule for octane numbers of PRFs and TPR...
      • Thermogravimetric assessment of thermal degradatio...
      • Asphaltene content by the in-line filtration method
      • Alkanes Induced Asphaltene Precipitation Studies a...
      • Versatile Systems For Continuous In-Line Blending ...
      • Wells–Dawson type Cs5.5H0.5P2W18O62 based Co/Al2O3...
      • Water injection for gasoline engines: Potentials, ...
      • Ultra-deep desulfurization of gasoline through aqu...
      • The effect of HZSM-5 catalyst particle size on kin...
      • Synthesis of a novel micro/mesoporous composite ma...
      • Physical properties of gasoline, isobutanol and ET...
      • Modeling of Heating and Evaporation of FACE I Gaso...
      • Numerical Study of Gasoline Homogeneous Charge Ind...
      • Inventory pinch gasoline blend scheduling algorith...
      • Influence of Gasoline Components on Engine Efficie...
      • Improved continuous-time model for gasoline blend ...
      • Gasoline Octane Number Improvement by Ethanol as a...
      • Facile one-pot solvent-free synthesis of hierarchi...
      • Energy saving of benzene separation process for en...
      • Development of a Fast, Predictive Burn Rate Model ...
      • Comparison of Raman and IR spectroscopy for quanti...
      • Assessment of Gasoline Additive Containing Ditert-...
      • Artificial intelligence modeling of DME conversion...
      • Application of Inelastic Neutron Scattering to the...
      • Zeolite Synthesis with Dominant and Secondary Temp...
      • Saturating Wax Coating Composition And Associated ...
      • Electrochemical sulfide removal and caustic recove...
      • Bioaugmentation for improving the activated sludge...
      • Simultaneous biological removal of phenol, sulfide...
      • Corrosivity monitoring system using RFID-based sen...
      • Corrosion monitoring along infrastructures using d...
      • Crack propagation of pipeline steel exposed to a n...
      • New insights into the effect of sodium on Fe3O4- b...
      • From the methanol to olefins: an operational asses...
      • Machine Learning Algorithms in Heavy Process Manuf...
      • Low Transition Temperature Mixtures Or Deep Eutect...
      • Base Stock Production Using A High Activity Cataly...
      • Hydrothermal preparation of Fe–Zr catalysts for th...
      • Monitoring light-ends in thermal CSP plants
      • Catalyst Configuration For Increased Hydrocracking...
      • Dynamic modeling and simulation of a bench-scale r...
      • Laminar Burning Velocities of Fuels for Advanced C...
      • Modern Procedure for Crude Oil Temperature Control...
      • ISO/TS 15066:2016 - Robots and robotic devices -- ...
      • Electrostatic Filtration Of Fine Solids From Bitum...
      • Separation Device For Use In Fluidized Bed Reactor...
      • Removal Of Aromatic Contaminants In Olefin Stream ...
      • Towards improved separation performance using poro...
      • Soluble, microporous, Tröger's Base copolyimides w...
      • Separation of mercury and arsenic from produced wa...
      • Screening of conventional ionic liquids for carbon...
      • Robust Superhydrophobic Foam: A Graphdiyne-Based H...
      • Retrofitting of extractive distillation columns wi...
      • Recent developments in zeolite membranes for gas s...
      • Olefin–paraffin separation performance of polyimid...
      • Microstructure manipulation of MFI-type zeolite me...
      • High-performance carbon molecular sieve membranes ...
      • Highly selective mixed-matrix membranes with layer...
      • Enhanced membrane antifouling and separation perfo...
      • Effect of VLE uncertainties on the design of separ...
      • Development of ceramic membranes from low-cost cla...
      • Determination and optimization of factors affectin...
      • Control of interpenetration in a microporous metal...
      • Amine-containing polymer/zeolite Y composite membr...
      • High-silica nanocrystalline Beta zeolites: efficie...
      • Mesostructured Zeolites
      • Method For Making Nes Framework Type Zeolites (Che...
      • Process For The Separation Of 1,4-Butanediol (Shell)
      • Isolation of four hydrocarbon effluent-degrading B...
      • Polymorphous FeS corrosion products of pipeline st...
      • Apparatus And Process For Producing Gasoline, Olef...
      • CO2 Oxidative Dehydrogenation of Ethane to Ethylen...
    • ►  April (140)
    • ►  March (120)
    • ►  February (40)
    • ►  January (282)
  • ►  2015 (1673)
    • ►  December (120)
    • ►  November (140)
    • ►  October (138)
    • ►  September (140)
    • ►  August (140)
    • ►  July (138)
    • ►  June (141)
    • ►  May (140)
    • ►  April (139)
    • ►  March (139)
    • ►  February (140)
    • ►  January (158)
  • ►  2014 (1579)
    • ►  December (157)
    • ►  November (79)
    • ►  October (182)
    • ►  September (120)
    • ►  August (140)
    • ►  July (60)
    • ►  June (141)
    • ►  May (140)
    • ►  April (160)
    • ►  March (120)
    • ►  February (140)
    • ►  January (140)
  • ►  2013 (1781)
    • ►  December (140)
    • ►  November (140)
    • ►  October (220)
    • ►  September (80)
    • ►  August (200)
    • ►  July (140)
    • ►  June (101)
    • ►  May (180)
    • ►  April (160)
    • ►  March (100)
    • ►  February (80)
    • ►  January (240)
  • ►  2012 (1890)
    • ►  December (60)
    • ►  November (240)
    • ►  October (120)
    • ►  September (60)
    • ►  August (162)
    • ►  July (140)
    • ►  June (241)
    • ►  May (160)
    • ►  April (185)
    • ►  March (133)
    • ►  February (190)
    • ►  January (199)
  • ►  2011 (614)
    • ►  December (202)
    • ►  November (181)
    • ►  October (231)
Simple theme. Powered by Blogger.