Technology Alerts

A Series of Alerts Provided by ASC Engineering

Tuesday, September 30, 2014

Deep Desulfurization of Model Oil by Extraction with a Low-viscosity Ionic Liquid [BMIM]SCN

CATEGORY: DESULFURIZATION
Deep Desulfurization of Model Oil by Extraction with a Low-viscosity Ionic Liquid [BMIM]SCN


Type
Journal Article
Author
L. Gao
Author
H. Wan
Author
M. Han
Author
G. Guan
URL
http://dx.doi.org/10.1080/10916466.2011.653466
Volume
32
Issue
11
Pages
1309-1317
Publication
Petroleum Science and Technology
Date
April 1, 2014
Abstract
Researchers used a low-viscosity ionic liquid 1-buthyl-3-methylimidazole thiocyanate ([BMIM]SCN) as extractant for the extractive desulfurization of thiophene in model oil. They studied a number of conditions, including extraction time, temperature, and volume ratio of ionic liquid to model oil. They propose the kinetics of extraction of thiophene. Under optimal extractive conditions, thiophene removal in model oil was 55.6%. Other sulfur compounds and real oil were also investigated.
Posted by Jean Steinhardt Consulting at 7:05 PM
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Labels: DESULFURIZATION, WEEKLY

No comments:

Post a Comment

Newer Post Older Post Home
Subscribe to: Post Comments (Atom)

Followers

Blog Archive

  • ►  2017 (58)
    • ►  January (58)
  • ►  2016 (1702)
    • ►  December (161)
    • ►  November (100)
    • ►  October (119)
    • ►  September (199)
    • ►  August (120)
    • ►  July (141)
    • ►  June (140)
    • ►  May (140)
    • ►  April (140)
    • ►  March (120)
    • ►  February (40)
    • ►  January (282)
  • ►  2015 (1673)
    • ►  December (120)
    • ►  November (140)
    • ►  October (138)
    • ►  September (140)
    • ►  August (140)
    • ►  July (138)
    • ►  June (141)
    • ►  May (140)
    • ►  April (139)
    • ►  March (139)
    • ►  February (140)
    • ►  January (158)
  • ▼  2014 (1579)
    • ►  December (157)
    • ►  November (79)
    • ►  October (182)
    • ▼  September (120)
      • Hierarchical TS-1 zeolite as an efficient catalyst...
      • Two-Phase Flow in Pipes: Numerical Improvements an...
      • Pre-Ignition of Gasoline-Air Mixture Triggered by ...
      • Stiff metal–organic framework–polyacrylonitrile ho...
      • Hollow metal–organic framework polyhedra synthesiz...
      • Extremely enhanced CO2 uptake by HKUST-1 metal–org...
      • Diversity in Porous Metal-Organic Framework Materials
      • A new metal–organic framework with potential for a...
      • Qualitative and quantitative analysis of lubricati...
      • Considerations for Upgrading Light Cycle Oil with ...
      • Nanostructured hydrotreating catalysts for electro...
      • A review of experimental procedures for heavy oil ...
      • Exergy Analysis Applied to Separation Processes in...
      • Behavior of Sulfur and Nitrogen Compounds in Diffe...
      • Deep Desulfurization of Model Oil by Extraction wi...
      • Catalyst Systems for the Catalytic Oligomerization...
      • Capture of CO2 From Hydrogen Plants (Chevron)
      • Method for extracting bitumen from an oil sand str...
      • Process for enhancing feed flexibility in feedstoc...
      • Separation of impurities from a hydrocarbon-contai...
      • Biofuels via hydrogenolysis-condensation (Shell)
      • Biofuels via hydrogenolysis-condensation (Shell)
      • Synergistic asphalt crude compositions (ExxonMobil)
      • Process For Production Of Distillate Fuel (Chevron)
      • Process and apparatus for alkylation (UOP)
      • Hybrid reactor based on combined cavitation and oz...
      • Simulation and environmental evaluation of process...
      • Process analysis of intensified absorber for post-...
      • Micro-structured fluidized bed membrane reactors: ...
      • Pipeline Integrity Management through Internal Cor...
      • Development and Application of a New Solution for ...
      • Design and experimental study on FBG hoop-strain s...
      • CO2 Pipeline Integrity: Comparison of a Coupled Fl...
      • Well-Defined Metal–Organic Framework Hollow Nanocages
      • Metal organic framework compounds
      • Metal-Cation-Directed de Novo Assembly of a Functi...
      • High gas storage capacities and stepwise adsorptio...
      • Evaluating metal–organic frameworks for natural ga...
      • Entropy generation analysis of a mini heat exchang...
      • The development of FCC catalysts for producing FCC...
      • The Framework of SCADA System Based on Cloud Compu...
      • Performance of graphene, carbon nanotube, and gold...
      • Network-based risk assessment of the US crude pipe...
      • Monitoring Bending and Buckling of Long Pipelines ...
      • Method of performing XZ-elliptic curve cryptograph...
      • Is Your Killed Carbon Steel Resistant To High Temp...
      • Integrity Management of a Complex LNG Facility
      • Indexing Model for Pipeline Risk Assessment and Co...
      • Guided wave radiation from a point source in the p...
      • Enhancing security in a wireless network (Hart Com...
      • Effective Management of Cathodically Protected Pla...
      • Cybersecurity Procurement Language for Energy Deli...
      • Combining Support Vector Machines and Segmentation...
      • Challenges to the integrity of old pipelines burie...
      • Best Practices in Asset Integrity Management System
      • Available Prediction Methods for Corrosion under I...
      • A Survey on Cloud-based Software Platforms to Impl...
      • Asset Integrity Management - Natural Gas Slug Catc...
      • A New Software for Management, Scheduling, and Opt...
      • A condition assessment model for oil and gas pipel...
      • Cracking of heavy vacuum gas oils over (HCeY) zeol...
      • Modelling of catalytic hydrocracking and fractiona...
      • Modeling Of Hydro-Cracking Lumps Of Series-Paralle...
      • The Selection of Fluid Catalytic Cracking Catalyst...
      • Direct conversion of ethene to propene on Ni-alumi...
      • Assessing LES models based on tabulated chemistry ...
      • Heat integration of isobutane dehydrogenation and ...
      • Development of highly stable catalyst for methanol...
      • Conversion of carbon dioxide into methanol – a pot...
      • A review of catalysts for the electroreduction of ...
      • Rotating bed reactor for CLC: Bed characteristics ...
      • Modeling the Chemical Looping Reforming Process Op...
      • Influence of the Type of Oxygen Carriers on the Pe...
      • Assessment of In Situ Bioremediation of Oil Contam...
      • Catalytic cracking process for biofeeds (Exxonmobil)
      • Catalyst Systems for the Catalytic Oligomerization...
      • Process For Production Of Distillate Fuel (Chevron)
      • Property prediction for asphalts from blended sour...
      • Methods of Regenerating Aromatization Catalysts (C...
      • Process for the preparation of alkylene glycol (Sh...
      • Upgrading of Heavy Crude Oil with W-Zr Catalyst
      • Study of Catalytic Cracking of Asphaltene in Near-...
      • Renovating Scaling Equation Through Hybrid Genetic...
      • Monte Carlo Simulation of Asphaltenes and Products...
      • Measurement of the Physical Properties of MacKay R...
      • Macroporous NiMo/alumina catalyst for the hydrocra...
      • In Situ Chemical Imaging of Asphaltene Precipitati...
      • Improving The Quality Of Petroleum Crude Oils By D...
      • Hydrocracking of Maya crude oil in a slurry-phase ...
      • Discrimination of Three Different Power-law Kineti...
      • Comparative Study on Hydrotreating of Venezuela De...
      • Coking behavior on a Ni–Mo/Al2O3 catalyst for the ...
      • Characterization of Non-Distillable Crude and Refi...
      • Carbon nanofibres coated with Ni decorated MoS2 na...
      • Asphaltenes biodegradation under shaking and stati...
      • Asphaltene Adsorption, a Literature Review
      • Application of a three-stage approach for modeling...
      • A Novel Solid–Liquid Equilibrium Model for Describ...
      • Adsorption and Oxidation of Asphaltenes onto in si...
      • A Comparative study on hydrocracking and hydrovisb...
      • A Visual Basic simulation software tool for perfor...
      • Condensation studies in membrane evaporation and s...
      • Process for extracting c4+ olefins and a process f...
      • Combination of membrane separation and gas condens...
      • Ultra-Microporous Triptycene-based Polyimide Membr...
      • Steam-methane reforming at low temperature on nick...
      • Effect of progressive Co loading on commercial Co–...
      • Pressure ratio and its impact on membrane gas sepa...
      • Method for preparing a palladium-gold alloy gas se...
      • Gas separation properties of ZIF-8/6FDA-durene dia...
      • Asymmetric mixed matrix membrane incorporating org...
      • Production of drinking water from seawater using m...
      • Nanodiamond immobilized membranes for enhanced des...
      • Modeling of water transport through nanopores of m...
      • Liquid fuel compositions (Shell)
      • Analysis of hydrocarbon liquid and solid samples (...
      • Asphalt production from oil sand bitumen (Exxonmobil)
      • Aminoethylation process having improved yield of a...
      • Alkylation process with recyle of hydrogen and rec...
      • Formation of defect-free 6FDA-DAM asymmetric hollo...
    • ►  August (140)
    • ►  July (60)
    • ►  June (141)
    • ►  May (140)
    • ►  April (160)
    • ►  March (120)
    • ►  February (140)
    • ►  January (140)
  • ►  2013 (1781)
    • ►  December (140)
    • ►  November (140)
    • ►  October (220)
    • ►  September (80)
    • ►  August (200)
    • ►  July (140)
    • ►  June (101)
    • ►  May (180)
    • ►  April (160)
    • ►  March (100)
    • ►  February (80)
    • ►  January (240)
  • ►  2012 (1890)
    • ►  December (60)
    • ►  November (240)
    • ►  October (120)
    • ►  September (60)
    • ►  August (162)
    • ►  July (140)
    • ►  June (241)
    • ►  May (160)
    • ►  April (185)
    • ►  March (133)
    • ►  February (190)
    • ►  January (199)
  • ►  2011 (614)
    • ►  December (202)
    • ►  November (181)
    • ►  October (231)
Simple theme. Powered by Blogger.