Analysis Of Wax Appearance And Dissolution Temperatures For Light And Heavy Crude Oils

Analysis Of Wax Appearance And Dissolution Temperatures For Light And Heavy Crude Oils

Type	Web Page
Author	Mohammad Shahrull Ikhmal Bin Nordin
Author	Petronas Universiti Teknologi
URL	http://utpedia.utp.edu.my/14600/
Date	2014-09
Website Type	Final Year Project
Abstract	Analysis of wax appearance temperature and wax dissolution temperature for light and heavy crude oils is to have an experimental research regarding the properties of light and heavy crude oils depending on some parameter which is wax appearance temperature and wax dissolution temperature. Based on the real industry, the crude oils naturally will be solid in certain temperature due to the circumferences and surrounding factor. The purpose of this research is to analyse the crude oils properties and hysteresis process. Therefore, the research will conducted by using rheometer. The samples of crude oils been request form PRSB, Bangi and PPM, Melaka. There are two types of light crude oils and three types of heavy crude oils. The equipment used to complete this research is rheometer. Rheometer used in laboratory located at block 20 is Discover Hybrid Rheometer (DHR) and been assisted by graduate assistant at block 20. DHR could show the pattern of the curve according to the parameter been setup and the WAT and WDT could be identify at the moment the flow curve change. The range of the WAT and WDT for light crude oils are 32 oC to 36 oC and 36 oC to 40 oC while the heavy crude oils are 5 oC to 24 oC and 15 oC to 32 oC. There was difference range between light and heavy crude oils it might because of composition of wax in the crude oils. It’s also may be affected by the density of the crude oils. As the conclusion, the objective been achieved. The best crude oils is lower WDT and WAT which is heavy crude oils 2 5.35 oC and 15.98 oC based on seabed condition in Malaysia which 15 oC.