Refinery Burner Simulation Design Architecture Summary

SAND2011-7374, October, 2011
Refinery Burner Simulation Design Architecture Summary
G.M. Pollock (Cyber Research and Education)
R. D. Halbgewachs (Effects-Based Studies); and M.J. McDonald (Effects-Based Studies)
Sandia National Laboratories, Albuquerque, NM
Abstract
Describes the architectural design for a high fidelity simulation of a refinery and refinery burner, including demonstrations of impacts to the refinery if errors occur during the refinery process.
The refinery burner model and simulation are a part of the capabilities within the Sandia National Laboratories’ Virtual Control System Environment (VCSE). Three components comprise the simulation:
HMIs developed with commercial SCADA software, a PLC controller, and visualization software. All of these components run on different machines. This design, documented after the simulation development, incorporates aspects not traditionally seen in an architectural design, but that were utilized in this particular demonstration development. Key to the success of this model development and presented in this report are the concepts of the multiple aspects of model design and development that must be considered to capture the necessary model representation fidelity of the physical systems.
Free Full Text Source: http://prod.sandia.gov/techlib/access-control.cgi/2011/117374.pdf